Skip to Content

FT Thomas Pump & Supply is pleased to represent the world’s finest and most respected pump brands, including:

Wanner Hydra-Cell is the leading manufacturer of Seal-Less, high-pressure (3000 PSI), multi-diaphragm, positive displacement pumps. The multi-diaphragm pumps have a track record in applications such as metering, dosing, injecting, and spraying chemicals, solvents, acids, hydrocarbons, natural gas liquids, alkalis, polymers, aqueous ammonia, resins, slurries, and recycled or dirty liquids. Hydra-Cell pumps offer an array of component materials such as thermoplastic and alloys and also have the ability to run dry without damage while providing customers with some of the lowest energy costs in the industry (85-90% efficiency). Hydra-Cell is one of the leaders in Oil and Gas Industry pumping light hydrocarbons, NGL’s, and other VOC’s.

Full range of Industrial Pumps including : Digital Dosing, Multi-Stage Centrifugal, Machine Tool, Boiler Feed, and Packaged Systems with advanced controls options and information gathering.

End suction, process, horizontal and vertical centrifugal pumps in a wide range of alloys. For process, water treatment, and fire protection.

Tuthill Pump Group engages in the design, development, and manufacture of fluid handling devices. It offers internal and external gear positive displacement pumps, such as process pumps; lubrication pumps for lubrication and circulation applications; and magnetically coupled miniature gear pumps.

Neptune offers a wide range of Hydraulic & Mechanical Diaphragm metering pumps that are typically used for chemical metering in process and agricultural industries. Chemical metering pumps are available for high and low pressure applications with manual and electronic stroke control. Neptune also offers a wide variety of accessories such as: Polymer Blend and Feed Systems, By-Pass  Feeders, Bromine Feeders, Glycol Feeders, Sample Coolers and Samplers, Corporation Stops & Injection Quills, as well as a variety of Relief and Backpressure Valves.

All-Flo is a leading manufacturer of air-operated double-diaphragm (AODD) pumps and fluid-handling solutions for industrial markets.

BJM Pumps supplies a wide variety of submersible pumps and pump accessories for many different applications including: slurry pumps, stainless steel pumps, corrosion resistant pumps, sump pumps, sewage pumps, trash pumps, sludge pumps, non-clog pumps, solids handling pumps, shredder pumps, vortex pumps, submersible dewatering pumps, sand pumps, agitator pumps, hydraulic pumps, explosion proof pumps, utility pumps and specialty pumps such as 12 Volt pumps and residue pumps (or Mop-Up-Pump).

March is the originator of the Centrifugal Seal-less Magnetic Drive Pump. Offers the Ultimate in Reliable, Trouble-Free Pumps for Chemical, Industrial, Medical, Marine, Solar and OEM applications. Flows from 1/2 GPM to 200 GPM, heads up to 160 feet, available in plastic or metallic construction, Submersible and Non-Submersible, available in a variety of AC, DC, Explosion Proof, and Air Motors.

Designed for a wide range of metering and dosing applications in the processing industries, the new line of Wanner Hydra-Cell® “Metering Solutions” is comprised of six metering pumps ranging in capacity from 0.32 to 894.6 GPH at pressure ratings of 50 to 2500 PSI. Employing Variable Frequency Drive (VFD) electronic flow adjustment to maintain greater accuracy throughout the turndown range, Hydra-Cell P Series metering pumps meet or exceed API 675 performance standards by providing steady-state accuracy of ±0.5%, linearity of ±1%, and repeatability of ±1%.

Verderflex peristaltic hose pumps and tube pumps are the ideal solution for pumping liquids and dosing chemicals. Ranging from smaller  (OEM) pumps to the world’s largest hose pumps used in very heavy industrial applications.

Verderflex pumps are used in many industries including: water and wastewaterminingfood & beveragechemical,pharmaceuticalsprinting and packaging.

Verder’s peristaltic tube and hose pumps can pump abrasive, highly corrosive, viscous, high density and shear sensitive products.

Dickow Pump Company has produced pumps for over 75 years. As the technical world leader in seal-less magnetic drive pumps, Dickow holds many patents, is ISO 9001 certified, and is a supplier-partner of major chemical companies. They also offer hot oil transfer pumps (Temps up to 850F), Multistage pumps, ANSI End Suction, and Side-Channel pumps.

Unique ReNu Pumphead reduces maintenance with single, no-tools, component replacement, and no leaking if there is tube failure.  Flow rates 0.01-1000 ml/min (0.001-15.86 USGPH)  at 100psi (7bar) pressure.  Cut chemical cost through higher accuracy metering.  Simple drop-in installation eliminates ancillary equipment.  4-20mA, PROFIBUS, 110V Logic and Manual Models

Vanton pumps are engineered to individual requirements in configurations including: cantilevered, close-coupled, integral-motor shaft, bearing-less, seal-less, self-priming, magnetic drive, Vortex, ANSI, DIN, and more. Vanton offers Thermoplastic Pumps for corrosive chemicals, acids, caustics, salts, chlorides, halogens, ultrapure water and other aggressive process and waste fluids.

LaBour Pumps designs tough, versatile chemical process pumps, chemical sump pumps and ANSI pumps including horizontal pumps, vertical sump pumps and self-priming pumps. Quality engineering, innovative design, rugged heavy duty construction and customer commitment have distinguished LaBour Pumps in the pump industry.

A division of Neptune Chemical Pump Co., which produces complete lines of bulk container mixers, drum mixers, light-duty portable mixers, heavy-duty portable mixers, cap-mount mixers, gear-drive mixers and specialty mixers for use in a wide range of mixing or blending applications. All of Neptune’s mixer lines have been designed, engineered and built to provide long life and trouble-free service while blending liquids, suspending or dissolving solids, dispersing immiscible liquids, and dispersing small amounts of gases in liquids.

Manufacturer of drum & container pumps including air operated pumps & electric & air operated double diaphragm pumps. Air operated double diaphragm pumps are made of elastomers including PTFE, Santoprene® & Buna-N. Types of pump tubes include seal-less & mechanically sealed, progressive cavity, drainage pump tubes & mixing pump tubes. Pumps are available with compressed air motors, explosion proof & continuous duty gear motors. Also available are accessories including nozzles, flow meters, hoses, couplings, fume barriers, quick connect couplings, reducers, discharge spouts, bonding & grounding wires & side mount clamps.

UTEX makes a range of sealing products, including gaskets, gasket sheets, proprietary high-tech O-rings, molded packings and seals for reciprocating pumps, hydraulics, mechanical seals, braided packings, and custom rubber-molded products catering primarily to the oil extraction, natural gas, and water distribution markets, along with other industrial businesses.

ANSI Centrifugal Pumps have been designed specifically for the process industry and are the standard for handling of corrosive and abrasive fluids. They feature solid PVDF fluid end for chemical compatibility and excellent abrasion resistance.

Leading Manufacturer of Pulsation Dampeners, Inlet Accumulators, Relief and Backpressure Valves, Spillstop, and other pumping accessories.

Continental Ultra Pump offers a complete line of Progressing Cavity Pumps and parts for the commercial waste water and industrial markets.

Manufacturers of vacuum pumps and systems using liquid ring vacuum pumps with single stage (TRS), two stage (TRH), and single stage variported (TRM/TRV) designs.

Stancor manufactures a variety of submersible pumps and control options suited for such pumping applications as dewatering, solutions, coal mines as well as wastewater / trash for municipalities.

Air-operated,double diaphragm “one nut” pumps with rupture protection barriers and leak detection alarm systems. Available in metals and plastics, duplex configuration and jacketed for heating or cooling. For food and hazardous materials  

Pioneer Pump centrifugal pumps designed for demanding applications such as industrial, municipal and dewatering.

Custom Engineered Systems for pH Adjustment, Biokill, Solvent and Chemical Dispensing/Collection, Pump Lift Stations, and Heavy Metal Removal.

Yaskawa is made in the USA and is the leading global manufacturer of low and medium voltage variable frequency drives, servo systems, machine controllers and industrial robots.  

A complete line of small pumps, including self-priming, straight centrifugal, diaphragm, submersible, mag drive, peristaltic, bellows, gear and piston models. Drive options include engines, electric motors or basic pedestal configurations.

Since 1907, PACO Pumps manufacture the world’s most complete lines of end suction, in-line, split case, non-clog, sump pumps, special purpose pumps, and pumping systems